bob-build - Bob release mode build


bob build [-h] [--destination DEST] [-j [JOBS]] [-k] [-f] [-n] [-p]
          [--without-provided] [-A | --audit] [-b | -B | --normal]
          [--clean | --incremental] [--always-checkout RE] [--resume]
          [-q] [-v] [--no-logfiles] [-D DEFINES] [-c CONFIGFILE]
          [-e NAME] [-E] [-M META] [--upload] [--link-deps]
          [--no-link-deps] [--download MODE] [--download-layer MODE]
          [--shared | --no-shared] [--install | --no-install]
          [--sandbox | --no-sandbox] [--clean-checkout]
          [--attic | --no-attic]
          PACKAGE [PACKAGE ...]


The bob build command is building packages locally in release mode. This mode is intended to provide maximum correctness at the expense of build time and disk requirements.

Default options

By default bob build works in the work subdirectory of the project root directory. The source-, build- and package-directories of packages are kept next to each other (work/<pkg>/src, work/<pkg>/build and work/<pkg>/dist). The <pkg>-subdirectories are derived from the package name. As recipes are changed Bob will always use a new, dedicated directory for each variant by adding a counting suffix to the above directories.

In contrast to bob dev the following options take precedence. They can be overridden individually by their inverse switches:

  • --download=yes

  • --clean

  • --sandbox

Build tree location

The build can be done directly in the project root directory or in a separate directory. To build outside of the project directory the build-tree must first be initialized with bob init. Any number of build trees may refer to the same project. Inside the external build-tree there may be a dedicated default.yaml, overriding settings from the project.


--always-checkout RE

Always checkout packages that match the regular expression pattern RE. The option may be given more than once. In this case all patterns will be checked.

Bob may skip the checkout of packages where a correct binary artifact can be downloaded from an archive. While this can dramatically decrease the build time of large projects it can hamper actually changing and rebuilding the packages with modifications. Use this option to instruct Bob to always checkout the sources of the packages that you may want to modify.

This option will just make sure that the sources of matching packages are checked out. Bob will still try to find matching binary artifacts to skip the actual compilation of these packages. See the --download and --download-layer option to control what is built and what is downloaded.


Move checkout workspace to attic if inline SCM switching is not possible. (Default)


Generate an audit trail when building.

This is the default unless the user changed it in default.yaml.


Do clean builds by clearing the build directory before executing the build commands. It will not clean all build results (e.g. like make clean) but rather make sure that no old build artifacts are in the workspace when a package is rebuilt. To actually force a rebuild (even though nothing has changed) use -f.

This is the default for release mode builds. See --incremental for the inverse option.


Do a clean checkout if SCM state is unclean.

Bob will check all SCMs for local changes at the start of a checkout. If a SCM checkout is tainted (e.g. dirty, switched branch, unpushed commits, …) Bob will move it into the attic and do a fresh checkout.

Use this option if you are not sure about the state of the source code. You can also use ‘bob status’ to check the state without changing it.

--destination DEST

Destination of build result (will be overwritten!)

All build results are copied recursively into the given folder. Colliding files will be overwritten but other existing files or directories are kept. Unless --without-provided is given using this option will implicitly enable --with-provided to build and copy all provided packages of the built package(s).

--download MODE

Download from binary archive (yes, no, deps, forced, forced-deps, packages)


build given module and it’s dependencies from sources


download given module, if download fails - build it from sources (default for release mode)


like ‘yes’ above, but fail if any download fails


download dependencies of given module and build the module afterwards. If downloading of any dependency fails - build it from sources (default for develop mode)


like ‘deps’ above, but fail if any download fails


combination of forced and forced-deps modes: if forced fails fall back to forced-deps

packages=<packages regex>

download modules that match a given regular expression, build all other.

--download-layer MODE

Download from binary archive for layer (yes, no, forced)

Acts like --download but only for the modules of the layer that match a given regular expression (--download option will be overwritten for matching modules). Can be used multiple times (if regex is used also multiple times the last mode wins). A sub layer is separated with a /.

no=<layer regex>

build modules of a layer that match a given regular expression from sources

yes=<layer regex>

download modules of a layer that match a given regular expression, if download fails - build it from sources

forced=<layer regex>

like ‘yes’ above, but fail if any download fails


Reuse build directory for incremental builds.

This is the inverse option to --clean. Build workspaces will be reused as long as their recipes were not changed. If the recipe did change Bob will still do a clean build automatically.


Install shared packages. A shared location must have been configured so that Bob knows where to put the package. This is the default.


Create symlinks to dependencies next to workspace.


Do not install shared packages if a shared location is configured.


Disable sandboxing


Do not use shared packages even if they are available.


Resume build where it was previously interrupted.

All packages that were built in the previous invocation of Bob are not checked again. In particular changes to the source code of these packages are not considered. Use this option to quickly resume the build if it failed and the error has been corrected in the failing package.


Enable sandboxing


Use shared packages if they are available. This is the default.


Upload to binary archive

-A, --no-audit

Do not generate an audit trail.

The generation of the audit trail is usually barely noticeable. But if a large number of repositories is checked out it can add a significant overhead nonetheless. This option suppresses the generation of the audit trail.

Note that it is not possible to upload such built artifacts to a binary archive because vital information is missing. It is also not possible to install shared packages that were built without audit trail for the same reason.

-B, --checkout-only

Don’t build, just check out sources


Override default or set environment variable.

Sets the variable VAR to VALUE. This overrides the value possibly set by default.yaml, config files passed by -c or any file that was included by either of these files.


Preserve whole environment.

Normally only variables configured in the whitelist are passed unchanged from the environment. With this option all environment variables that are set while invoking Bob are kept. Use with care as this might affect some packages whose recipes are not robust.


Assign the meta variable VAR to the given value in the audit trail. The variable can later be matched by bob archive as meta.VAR to select artifacts built by this project. Variables that are defined by Bob itself (e.g. meta.bob) cannot be redifined!

-b, --build-only

Don’t checkout, just build and package. Checkout scripts whose checkoutUpdateIf property was evaluated as true will still be run.

If the sources of a package that needs to be built are missing then Bob will still check them out. This option just prevents updates of existing source workspaces that are fetched from remote locations. A notable exception is the import SCM which will still update the workspace even if this option is present.


Use additional configuration file.

The .yaml suffix is appended automatically and the configuration file is searched relative to the project root directory unless an absolute path is given. Bob will parse these user configuration files after default.yaml. They are using the same schema.

This option can be given multiple times. The files will be parsed in the order as they appeared on the command line.


Preserve environment variable.

Unless -E this allows the fine grained addition of single environment variables to the whitelist.

-f, --force

Force execution of all build steps.

Usually Bob decides if a build step or any of its input has changed and will skip the execution of it if this is not the case. With this option Bob not use that optimization and will execute all build steps.

-j, --jobs

Specifies the number of jobs to run simultaneously.

Any checkout/build/package step that needs to be executed are counted as a job. Downloads and uploads of binary artifacts are separate jobs too. If a job fails the other currently running jobs are still finished before Bob returns. No new jobs are scheduled, though, unless the -k option is given (see below).

If the -j option is given without an argument, Bob will run as many jobs as there are processors on the machine.

-k, --keep-going

Continue as much as possible after an error.

While the package that failed to build and all the packages that depend on it cannot be built either, the other dependencies are still processed. Normally Bob stops on the first error that is encountered.


Do not move checkout workspace to attic if inline SCM switching is not possible. Instead a build error is issued.

-n, --no-deps

Don’t build dependencies.

Only builds the package that was given on the command line. Bob will not check if the dependencies of that package are available and if they are up-to-date.


Do not create symlinks to dependencies next to workspace.


Don’t write a logfile. Without this bob is creating a logfile in the current workspace. Because of the pipe-usage many tools like gcc, ls, git detect they are not running on a tty and disable output coloring. Disable the logfile generation to get the colored output back.

-p, --with-provided

Build provided dependencies too. In combination with --destination this is the default. In any other case --without-provided is default.

-q, --quiet

Decrease verbosity (may be specified multiple times)

-v, --verbose

Increase verbosity (may be specified multiple times)


Build just the named packages without their provided dependencies. This is the default unless the --destination option is given too.

See also

bobpaths(7) bob-status(1) bob-init(1)